Stall Horn/Approach Tips

[jsmarko3]

Are you using the Legacy flight model, or the Modern flight model? You need to be using the Modern, just in case.

[jsmarko3]

As I understand it, the channel isn't bugged, it's still incomplete. So yes it is being worked. I'm not aware of any firm release commitments.

[jsmarko3]

There was no performance drop. There was an additional rendering channel that the DC-6 can and will make use of enabled in the SU5 beta, but it never...

[jsmarko3]

The documentation 😉...

[jsmarko3]

Sounds like a job for Science!

Load into the DC-6. Get her started up. Firewall the throttles with the parking brake on and report back....

[jsmarko3]

Buying from the marketplace was your first mistake.

[jsmarko3]

Hey at least PMDG are doing it.

Poor Aerosoft are stuck in a holding pattern unable to add charts to the CRJ EFB, and PMDG just announced...

[jsmarko3]

They keybind you're looking for to toggle reverse is "water rudder."...

[jsmarko3]

If you poke around enough, you can find some breadcrumbs pointing to something coming further down the pipe. Things like Rob's comments on something they...

[jsmarko3]

Good point. In that case, you would probably need to either leave the AFE enabled and just toggle the blowers, or disable him and set the throttles to...

[jsmarko3]

The AFE, as you noticed, will correct the manifold pressure if you switch blowers. Whether or not the momentary overpressure will harm the engines I'm...

[jsmarko3]

Looks like it's dc6_023_obj through dc6_026_obj for injector switches 1-4.

In the DC-6 folder, under Documentation, there are some XML files...

[jsmarko3]

You would need to use a third party program like Axis and Ohs or FSUPIC7. Both have their own little scripting language to set the right LVAR to the...

[jsmarko3]

360 different directions to choose from and of course they're only ever going to fly off at the fuselage.

EDIT: oh you said height not thickness....

[jsmarko3]

Another criminally underutilized chart, thank you for the reminder.

Yes, I've covered stalls and stall accessories in the online ground school...

[jsmarko3]

That sounds like an awful lot of effort for something that can be roughly eyeballed and then corrected without issue.

If you want a real...

[jsmarko3]

Thanks for the post Dan. It's been a while since I've read the POH cover to cover. I have heard of stall buffeting, but never having experienced it in...

[jsmarko3]

What are you guys using for weather? The only time I've seen this is with Rex Weather Force, there's an issue with when it injects the weather the altimeter...

[jsmarko3]

This is a pretty simple question, and I'm half embarrassed I'm even asking it, but does the DC-6 have a stall horn? I ask because my last handful of...

[jsmarko3]

You can adjust some weight properties in Simbrief, but there's only one climb profile and cruise profile. I posted one their forums and got some corrections...